BZVKG - METEX T 103
- MSDS: BZVKG
- Manufacturer: MACDERMID INC
- Product Name: METEX T 103
- National Stock Number: 6810-00F049107
Product Identification
Product ID:METEX T 103
MSDS Date:05/13/1996
FSC:6810
NIIN:00F049107
MSDS Number: BZVKG
Responsible Party
WATERBURY, CT 06702-5000
US
Emergency Phone: 203-575-5700/313-644-5626
Info Phone: 203-575-5700/203-575-5606
Cage: MACDE
Contractor
Telephone: 203-575-5606/800-424-9300(CHEMTREC)
Cage: 0PX54
Ingredients
SODIUM HYDROXIDE, CAUSTIC SODA, LYE
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 30-40%
OSHA PEL 2 MG/CUM
ACGIH TLV: 2 MG/CUM CEILING
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:ORAL LD50(ALBINO RATS): 500 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: SEVERE BURNS. INGESTION:
MAY BURN MOUTH/THROAT & STOMACH. DAMAGE TO DIGESTIVE TRACT
INCLUDING CORROSIVE EFFECTS. INHALATION: MAY CAUSE BURNS TO ENTIRE
RESPIRATORY SYSTEM. ACUTE PULMONARY ED EMA MAY DEVELOP.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS, WATERING, BLINDNESS, ITCHING, TINGLING
SENSATION, PALE/BLUISH FACE.
First Aid
First Aid:EYES/SKIN: WASH W/WATER FOR 15 MINS. INGESTION: RINSE MOUTH &
THROAT LIBERALLY W/WATER. DON'T INDUCE VOMITING. INHALATION: REMOVE
TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED. IF UNCONSCIOUS/CONVULSING,
DO N'T INDUCE VOMITING/GIVE WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL, FOAM, HALON.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NEVER ALLOW RUN-OFF TO ENTER
SEWERS/WATERWAYS.
Accidental Release
Spill Release Procedures:AVOID DUSTING. SWEEP UP & COLLECT FOR DISPOSAL
IN PLASTIC RECOVERY DRUM. DON'T RETURN TO ORIGINAL CONTAINER. FLUSH
RESIDUE TO CHEMICAL DRAIN W/LARGE QUANTITIES OF WATER.
Handling
Handling and Storage Precautions:STORE IN PROPERLY SEALED ORIGINAL
CONTAINER. ACIDS/ALKALINES: ACID CONTAINING MATERIAL SHOULD BE
STORED SEPARATE FROM ALKALINE MATERIALS & CYANIDES.
Other Precautions:CORROSIVE MATERIAL: CORROSIVE MATERIALS MUSTN'T BE
ABOVE, BELOW/ADJACENT TO FLAMMABLES/OXIDIZERS.
Exposure Controls
Respiratory Protection:IF OSHA-PEL/TLVS ARE EXCEEDED, USE NIOSH
APPROVED RESPIRATOR. LARGE SPILLS, ENTRY INTO LARGE TANKS,
VESSELS/ENCLOSED SMALL SPACES W/INADEQUATE VENTILATION, A PRESSURE
DEMAND, SCBA IS RECOMMENDED.
Ventilation:GENERAL/LOCAL EXHAUST VENTILATION.
Protective Gloves:CHEMICAL
Eye Protection:SAFETY GLASSES/SPLASH PROOF GOGGLES
Other Protective Equipment:CHEMICAL APRON, BOOTS, SAFETY SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE TO OFF-WHITE W/MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:LEATHER & COTTON MATERIALS.
Hazardous Decomposition Products:SODIUM MONOXIDE
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. CORROSIVE MATERIAL UN1823, NA8225.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.